17.32.020 Development standards.
The general property development standards for the C-D zone shall be as set forth in Table 2-18: C-D Zone Development Standards. See also Section 16.18.030 (Lot Dimensions) for minimum lot dimensions.
Table 2-18: C-D Zone Development Standards | ||
|---|---|---|
Development Standard | C-D Zone | Additional Regulations |
Maximum Residential Density | 36 units/net acre | See also Section 17.70.040 (Density) |
Minimum Setbacks | ||
Front | No setback required unless adjacent to zone with minimum setback requirement, in which case the adjoining setback shall be as provided in the zone of adjacent lot. Lots separated by streets or other rights-of-way are not considered adjacent. If more than one zone is adjacent, the largest setback shall be required | |
Interior Side and Rear | ||
Corner Lot—Street Side | ||
Maximum Building Height | 50 feet | Maximum height may be increased up to 75 feet with the provision of defined community benefits, as set forth in Section 17.32.030(E) (Maximum Building Height in C-D Zone). See also Section 17.70.080 (Height Measurement and Exceptions) |
Minimum Building Height | 2 stories | The minimum building height shall be 2 stories adjacent to all street frontages |
Maximum Lot Coverage | 100% | See also Section 17.70.120 (Lot Coverage) |
Maximum Floor Area Ratio | 3.0—maximum allowed for buildings up to 50 feet in height 3.75—maximum allowed for buildings approved greater than 50 feet in height 4.0—maximum allowed for approved buildings over 50 feet in height with transfer of development credits for open space protection or historic preservation See also Section 17.70.060 (FAR Measurement and Exceptions) | |
Minimum Lot Area | 3,000 square feet | See also Section 16.18.030 (Lot Dimensions) |
Edge Condition Requirements | See Section 17.70.050 (Edge Conditions) | |
(Ord. 1650 § 3 (Exh. B), 2018)