17.46.020 Development standards.
The general property development standards for the PF zone shall be as set forth in Table 2-23: PF Zone Development Standards. See also Section 16.18.030 (Lot Dimensions) for minimum lot dimensions.
Table 2-23: PF Zone Development Standards | ||
Development Standard | PF Zone | Additional Regulations |
Minimum Setback | ||
Front | No setback unless adjacent to zone with minimum setback requirement, in which case the adjoining setback shall be as provided in zone of adjacent lot. Lots separated by streets or other rights-of-way are not considered adjacent. If more than one zone is adjacent, the largest setback shall be required | |
Interior Side and Rear | ||
Corner Lot—Street Side | ||
Maximum Building Height | 35 feet | Maximum height may be increased up to 50 feet for city-owned facilities, as set forth in Section 17.46.030 (Additional Regulations). See also Section 17.70.080 (Height Measurement and Exceptions) |
Maximum Lot Coverage | 60% | See also Section 17.70.120 (Lot Coverage) |
Maximum Floor Area Ratio | For a parcel adjacent to a C-D zone: 2.0 For a parcel adjacent to any zone other than C-D: 1.0 See also Section 17.70.060 (FAR Measurement and Exceptions) | |
Minimum Lot Area | 6,000 square feet | See also Section 16.18.030 (Lot Dimensions) |
Edge Condition Requirements | See Section 17.70.050 (Edge Conditions) | |
(Ord. 1650 § 3 (Exh. B), 2018)